1300802163
 

Blog

But-2-yne-1,4-diol WEL 0.5 mg/m³: PCBU checklist before Australia’s Dec 2026 switch

Why HSE and ops should care But-2-yne-1,4-diol (2-butyne-1,4-diol) is a new airborne contaminant with an 8-hour WEL of 0.5 mg/m³. WES remains the reference until 30 November 2026; WEL applies from 1 December 2026 once implemented. Check your WHS regulator. Where airborne risk shows up Fine chemical manufacture, electroplating and formulation. Bag tipping, weighing, milling,...

Diesel particulate matter in tunnelling: preparing for Australia’s new WEL of 0.01 mg/m³

Tunnelling puts people and diesel plant in the same confined air volume for long shifts. Diesel particulate matter (DPM) is the particulate fraction of diesel exhaust that occupational hygienists sample when discussing elemental carbon in a heading, portal or plant bay. From 1 December 2026, Safe Work Australia’s national list introduces a Workplace Exposure Limit...

Bisphenol-A WEL 2 mg/m³: monitoring and control priorities for PCBUs

Bisphenol-A (BPA) has a new WEL of 2 mg/m³ (8-hour TWA). WES applies until 30 November 2026, then WEL applies when implemented. Exposure profile BPA may occur in resin, polycarbonate and epoxy manufacture, powder handling, bag emptying, blending, charging, milling, maintenance, labs and clean-down. Skin contact and sensitisation remain separate from airborne comparison. SEG and...

Barium sulfate (respirable): preparing for Australia’s new WEL of 1.35 mg/m³

Respirable barium sulfate is a new WEL listing at 1.35 mg/m³ (8-hour TWA). Inhalable barium sulfate is separate; do not collapse fractions. WES applies until 30 November 2026, then WEL applies once implemented. Check your WHS regulator. Why PCBUs should act now Powder handling, bag cutting, hopper charging, milling, screening, fillers, plastics compounding, pack-out, damaged...